Ei413 RadioLINK Panel Interface Module

Easily connect your alarm system for total control and protection. Use the Ei413 Panel Interface Module tto connect RadioLINK alarms and accessories with other alarm panels.

Build two-way communication between Aico alarms and a panel system
Connects wirelessly with all other Aico wireless interconnection products and is hard-wired into the panel system
Powered directly from the panel system

Product Features

Operation of the Ei413 RadioLINK Panel Interface Module

On receiving a volt-free switched hardwired signal from the panel, the module will transmit a RadioLINK alarm signal to activate the alarms in the system. If a Fire Alarm has activated, the module will recognise the signal as a fire, and switch the relevant contacts to activate the panel. If a Carbon Monoxide Alarm has activated, the module will recognise the signal as a Carbon Monoxide (CO) leak and switch the relevant contacts to activate the panel.

No wires required

Eliminate the need for any cabling between the Ei413 and the Smoke/Heat/Carbon Monoxide Alarms used in the Fire Alarm system.

‘House Coding’

‘House Code' your Fire Alarm network to reduce the risk of adjacent properties’ alarms from communicating with each other.